Trying to decide which RDT water leak detection solution is the best fit for your application? Start with our application chart, or contact us today to discuss your needs with an application specialist!
|Installation||Valve Size||Power||Output Signal?||Audible Alarm?||Temperature Sensing?||Sensor Type||Model No.|
|Water Mains – App-Based, Wireless Full-Facility Protection||1/2″, 3/4″, 1″, 1-1/4″||120V AC||Push Notification to App||Yes||Yes||Wireless||RSC-900-x|
|Plenum-Rated Kits – Water Heaters, Water Mains, HVAC Pans, Simple Alarms||1/2″, 3/4″, 1″, 1-1/4″, 1-1/2″, 2″, 2-1/2″, 3″, 4″||Step-down transformer||Dry Contacts – NO/C/NC||Yes||No||Wired||MK6 Series|
|Water Mains – Localized Protection||3/4″, 1″, 1-1/4″, 1-1/2″, 2″, 2-1/2″, 3″, 4″||120V AC||Dry Contacts – NO/C/NC||Yes||No||Wired||RS-080-x|
|Washing Machines||Dual-Port 1/2″||120V AC||No||Yes||No||Wired||RS-090-x|
|Hose-Fed Appliance – Dishwashers, Ice Makers, Beverage Dispensers, RO Systems, etc.||1/2″ to 3/8″ fittings||120V AC or step-down transformer||Dry Contacts – NO/C/NC||Yes||No||Wired||RS-092-x|
|Water Heaters, Water Tanks, etc.||1/2″, 3/4″, 1″, 1-1/4″||120V AC||Dry Contacts – NO/C/NC||Yes||No||Wired||RS-094-x|
|Modified Water Heater Kits for Specific Applications – Low-Profile Tanks, Power Vent and Gas Flow Shut-Off||3/4″||120V AC||Dry Contacts – NO/C/NC||Yes||No||Wired||RS-094-MKx|
|Sump Pumps, Clean Rooms, etc.||No Valve||9V Battery||No||Yes||No||Wired||RS-095|
|120V AC||Dry Contacts – NO/C/NC||Yes||No||Wired||RS-096-x|
|HVAC / Condensate Pans||No Valve||120V AC||Dry Contacts – NO/C/NC||Yes||No||Wired (elevated 1/2″)||RS-097-x|
Choosing Between a Wired & Wireless Leak Protection Solution
Both the Wired and Wireless Systems operate in basically the same way. The general rule of thumb is, if your leak detection needs require sensing on multiple living levels (basement, first floor, second floor, etc.) – or if you need app-based sensor identification, remote valve control and system notification via your smart phone – then you would probably be better off using the RSC-900 wireless system. If you are looking to detect in a single location (one appliance, or one room), a wired option is likely a more cost-effective choice. You can always contact RDT to discuss your application. We are committed to getting you the best solution!
Accessories to Customize Your Solution
A wide range of accessories is available to customize your installation according to your specific requirements.
Most of the wired sensing products listed above support the optional Sensing Rope Accessory Kit, which is ideal for use with low tanks or for room perimeter and sub-floor leak detection requirements. The Sensing Rope wires directly into the Sensor openings on the FloodMaster terminal block. Sold separately. For wired system, order Starter Kit RSA-175-810.
Most of the wired sensing products listed above can also provide external event notification via the Auto Dialer (RSA-600-003). The Auto Dialer wires directly into the Normal Open contacts on the FloodMaster terminal block. Accessories sold separately.