full
border
#666666
http://reliancedetection.com/wp/wp-content/themes/smartbox-installable/
http://reliancedetection.com/
#0068b3
style4

FAQs: RSA-500-050 Wired Wall Switch

How do I connect the Wired Wall Switch to the RS-360?

At the Receiver terminals labeled WALL SWITCH, place one wire on WALL SWITCH (pin 1) and one wire to GROUND (pin 2). It does not matter which wire goes to the pins, as long as one goes to each pin. At the wall switch, one wire goes to the upper pin and one to the lower pin. Any electrical wiring should be done with the Receiver powered down and unplugged from the wall outlet. Consult the RSA-500-050 installation manual (PDF) for additional details.

Wiring the RSA-500-050 wall switch to the RS-360.

Does wire come with the package?

Yes. 25 feet of 2 conductor 22 AWG black wire is provided with the kit.

What is the maximum recommended distance between the wire wall switch and the Receiver?

The distance should not exceed 100 feet.

What gauge wire should I use?

2 conductor 22 AWG is recommended.

Can I do the install of the wired wall switch myself?

Installation should be done following all local electrical and safety codes. We recommend a licensed electrician perform all electrical work.

default
Loading posts...
link_magnifier
#ececec
on
fadeInDown
loading
#ececec
off